ALLIS CHALMERS - Gyratory Crusher

1 - ALLIS CHALMERS 54in x 74in PARTS UNIT Gyratory Crusher, S/N C-1996. Parts available include Top Shell (1-piece), Head & Mainshaft, Hydroset, manufactured in 1968. Hydroset was rebuilt in 1997 - good condition. The mainshaft was serviced in 1998 - good condition.

HEAD & MAINSHAFT MEASUREMENTS:
A) Sleeve Diameter 22-5/8in OD (approximate).
B) Sleeve thickness is 1-1/4in, so minus 2-1/2in of Sleeve on the Diameter makes the Upper Main Shaft Diameter 19-3/4in OD (approximate).
C) Overall length of the Main Shaft is 214-1/2in (approximate), keeping in mind that about .25inof the Sleeve is protruding beyond the end of the Main Shaft.
D) The Main Shaft is threaded for the Sleeve & an external thread for the Head Nut & Dowel.
E) Lower Shaft Diameter 27-1/2in OD (approximate).
F) Length from Bottom End of Shaft to the Edge of the Mantle Liner 63in (approximately)
G) Length from Bottom End of Shaft to the Dust Seal Retainer 52-1/2in (approximate).

PRICE...(Head & Mainshaft)......................$150,000 USD
(Top Shell)...................................$225,000 USD
(Hydroset).- stored in Savona......$60,000 USD