KEMCO Jaw Crusher

1 - 1995 KEMCO 48in Wide x 42in Deep Double Toggle Jaw Crusher, S/N J433, Type No. C-160, Feed Mouth: 1219 mm 48in Wide x 1066 mm 42in Deep, Minimum Outlet setting is 125 mm 5in approx. Standard RPM 275, Max RPM 285, Jaw Max. Opening is 300 mm 12in approx. Jaw Minimum Opening 125 mm 5in approx. According to the Manual the maximum size rock is 80% of the feed mouth opening or approx. 33in - 38in Rock. complete with lubrication system and 132 kW (177 hp) drive motor; equipment in excellent condition. Drive Motor S/N T42730739; Speed 985 RPM, Volts 380 Volts, Amps 247, Type TIK, Frame D315M. Jaw Crusher Manufactured in Australia in 1996 by Metquip Pty. Ltd. NSW. Job No. J433, Equipment Number 200-CR-01, Min - 1008 - 1008.

Condition Report Feb 2007: The Kemco Jaw is in excellent condition. The frame is almost new in appearance.
The spring and adjustments are free of any pitting on both the swing and backing plate side.

The belt sheeve and shock / torque asorbing spring mechanism show no damage or appreciable ware.

The backing plate appears near new the corrogations are still 3 1/2in deep. The swing side shows less depth to corrogation and may be by design.

Unit has spherical roller bearings which appear to be in good condition.

Physical Dimensions and Weight:
Weight: Complete crusher is 49,090 Kg. Or 108,225 lbs.
Crusher height from Base to top of bolts on mainframe 3,759 mm or 12' 4in H
Crusher Width: 2487 mm to outside of Sheave may be reducable 8'2in Wide
Length: 4,258 mm or 13' 11in Long
Crusher has a two piece Mainframe and could be split to put into containers. Probably would take 3 Containers due to the weight constraints of the overall crusher and the drive and lube system.